Avaliação clínica e bioquímica de cães submetidos a dois métodos de hidroterapia / Clinical and biochemical evaluation of dogs submitted to two methods of hydrotherapy

Avaliou-se a resposta dos parâmetros fisiológicos de frequência cardíaca (FC) e respiratória (FR), temperatura retal (TR) e a atividade sérica das enzimas creatina quinase (CK) e lactato desidrogenase (LDH) em cães adultos hígidos, machos e fêmeas, sob duas modalidades de hidroterapia. Dez cães foram distribuídos em dois grupos de cinco animais, denominados de grupo I (caminhada em esteira aquática) e grupo II (natação) e submetidos a duas sessões por semana com duração inicial de 10 minutos, acrescida de cinco minutos por sessão até 30 minutos, durante nove semanas. As avaliações foram realizadas antes, imediatamente depois e quatro horas após o exercício em todas as sessões para as variáveis de FC, FR e TR e nos dias um, sete, 28 e 60 para CK e LDH. Não houve diferença (P>0,05) quando comparados os valores médios dos parâmetros fisiológicos de frequência cardíaca e respiratória e de temperatura retal. Os níveis de CK e LDH não se elevaram após a hidroterapia nos diferentes tempos e dias avaliados. Dessa forma, foi possível concluir que as sessões de natação e de caminhada em esteira aquática não causaram alterações nos parâmetros fisiológicos de frequência cardíaca e respiratória, temperatura retal e nos níveis sanguíneos de creatina quinase (CK) e lactato desidrogenase (LDH) no protocolo proposto.(AU)

The physiological parameters of heart rate (HR), respiratory rate (RR), rectal temperature (TR), and serum activity of creatine kinase (CK) and lactate dehydrogenase (LDH) enzymes were determined in healthy dogs, male and female, under two hydrotherapy modalities. Ten dogs were distributed in two groups of five animals, named Group I (underwater treadmill walk) and Group II (swimming), submitted to two sessions per week with initial duration of 10 minutes, plus 5 minutes per session up to 30 minutes, during 9 weeks. The evaluations were performed before, immediately after and 4 hours after exercise in all sessions for the HR, RR and TR variables and on days one, seven, 28 and 60 for CK and LDH. There was no difference (P> 0.05) when comparing the mean values of physiological parameters of heart and respiratory rate and rectal temperature. CK and LDH levels did not rise after hydrotherapy at different times and days evaluated. So, it was possible to conclude that swimming sessions and underwater treadmill walking did not cause alterations in the physiological parameters of heart and respiratory rate, rectal temperature, and the blood levels of creatine kinase (CK) and lactate dehydrogenase (LDH) in the proposed protocol.(AU)

Concentração plasmática de diclofenaco sódico em cães, submetidos à fonoforese / Plasma concentration of diclofenac sodium in dogs submitted to diclofenac phonophoresis

Com o objetivo de avaliar a concentração plasmática de diclofenaco sódico (DS) emulgel em cães com ou sem o uso de fonoforese e de verificar se a fonoforese induz à maior absorção desse fármaco, foram utilizados cinco cães, e todos eles passaram por oito grupos distintos. Um grupo recebeu, via oral, um comprimido de DS, 40mg, por animal, e sete grupos receberam aplicação transdérmica de diclofenaco sódico emulgel por ultrassom. Pela via transdérmica, a área de aplicação era de 20cm². A frequência do ultrassom foi de 1MHz, modo contínuo, com intensidade de 0,4Wcm-2. Colheram-se amostras de sangue antes de se executarem os protocolos - tempo zero -, após uma hora - tempo 1 - e após quatro horas da aplicação - tempo 2 - em todos os grupos, e realizou-se análise das amostras por cromatografia líquida de alta eficiência. Houve diferença (P<0,05) apenas nas amostras no tempo 1 do grupo que recebeu dose oral de DS em relação às outras amostras. Não foi possível verificar concentração plasmática de diclofenaco sódico com aplicação tópica em cães submetidos ou não à fonoforese, apenas quantificou-se o diclofenaco sódico pela administração via oral. A facilitação da penetração transdérmica pelo ultrassom não foi verificada sob o protocolo especificado nesta pesquisa.

The aim of this study was to evaluate the plasma concentration of diclofenac sodium (DS) in dogs submitted to diclofenaco phonophoresis and to evaluate if phonophoresis induces greater absorption of this drug in dogs. Five dogs were used in eight different groups at different times: One group received oral administration of 40mg of DS per dog and seven groups received topical application of emulgel DS. The topical application area was 20cm². A continuous ultrasound frequency of 1MHz and intensity of 0.4W cm-2 was used. Blood collections were performed before the treatment (T0), and 1h (T1) and 4h (T2) after ultrasound application for all groups. DS concentrations in plasma were measured by high performance liquid choramatohraphy (HPLC). There was significant increase of DS plasma concentration only at T1 in the oral administration group. It was not possible to detect any concentration of DS in the plasma of dogs after topical application of DS, even after DS phonophoresis. The facilitation of transdermal penetration by ultrasound has not been verified under the protocol specified in this research.

Biochemical control and toxicity after intensity-modulated radiation therapy for prostate cancer.

Intensity modulated radiation therapy (IMRT) has achieved widespread use for prostate cancer; however, in relation to this use, outcomes studies are still relatively sparse. We report a single-institutional experience in outcomes analysis with the use of IMRT for the primary management of prostate cancer. One hundred thirty consecutive patients with adenocarcinoma of the prostate were treated at a single institution using IMRT with curative intent. Thirty-six (28%) patients were classified as low-risk, 69 (53%) as intermediate-risk, and 25 (19%) as high-risk. The median dose prescription was 76 Gy to the planning target volume. Sixty-five (50%) patients received androgen deprivation therapy (ADT) for a median 4 months, starting 2 months prior to IMRT. Biochemical failure was defined as PSA < post-treatment nadir+2. Gastrointestinal (GI) and Genitourinary (GU) toxicity were defined by RTOG criteria. Median follow-up was 53 months. By NCCN risk category, 4-year biochemical control was 97%, 94%, and 87% for low, intermediate, and high-risk patients, respectively. Among disease factors, multivariable analysis demonstrated the strongest association between biochemical control and Gleason score < or =6 (p=0.0371). Therapy was well tolerated with no Grade 4 toxicity and limited grade 3 GI or GU toxicity. Acute Grade 3+ GI and GU toxicity rates were 0% and 2%, and maximal late Grade 3+ GI and GU toxicity rates were 5% and 6%, respectively. Late rectal toxicity was associated with higher volumes of RT to the rectum. By last follow-up late Grade 3+ toxicity was 2% for both GI and GU systems. In conclusion, patients treated with IMRT for prostate cancer have excellent rates of biochemical control and low rates of severe toxicity of treatment.

Estimulação elétrica neuromuscular em cães com atrofia muscular induzida / Neuromuscular electric stimulation in dogs with induced muscle atrophy

Empregou-se a estimulação elétrica neuromuscular (EENM) de baixa freqüência no músculo quadríceps femoral de cães com atrofia induzida e avaliou-se a ocorrência de ganho de massa nessa musculatura. Foram utilizados oito cães com pesos entre 15 e 30kg, distribuídos aleatoriamente em dois grupos denominados de I ou controle e II ou tratado. A articulação femorotibiopatelar esquerda foi imobilizada por 30 dias pelo método de transfixação percutânea tipo II, com retirada de aparelho de imobilização após esse período. Decorridas 48 horas da remoção, foi realizada a EENM nos cães do grupo II, cinco vezes por semana, com intervalo de 24 horas cada sessão, pelo período de 60 dias. Foram avaliadas a circunferência da coxa, a goniometria do joelho, a análise clínica da marcha, as enzimas creatina-quinase (CK) e aspartato-amino-transferase (AST) e a morfometria das fibras musculares em cortes transversais do músculo vasto lateral colhido mediante biópsia muscular. A EENM foi empregada no músculo quadríceps femoral na freqüência de 50Hz, duração de pulso de 300 milisegundos e relação de tempo on/off de 1:2. Quanto à morfometria das fibras do músculo vasto lateral, no grupo tratado houve aumento significativo (P<0,05) da área transversal aos 90 dias em relação ao dia zero. A EENM de baixa freqüência ocasiona hipertrofia do músculo vasto lateral em cães após a imobilização rígida temporária da articulação do joelho.

Low frequency neuromuscular electrical stimulation (NMES) was used on the femoral quadriceps of dogs with induced muscular atrophy and the occurrence of gain in mass in these muscles was evaluated. Eight dogs from 15 to 30kg were randomly distributed in two groups named I, or control; and II, or treated. For the induction of muscular atrophy, the left femoral-tibial-patellar joint was immobilized for 30 days by percutaneous transfixation type II. After 30 days, the immobilization device was removed. The NMES treatment began 48 hours after the removal of the immobilization device of the dogs of group II, and it was carried out five times per week with an interval of 24 hours between each session, for 60 days. The following parameters were measured: thigh circumference, goniometry of the knee, clinical gait analysis, creatine kinase (CK) and aspartate aminotransferase (AST) enzymes, and morphometry of the muscular fibers in transversal cuts of the vastus lateralis muscle collected through muscular biopsy. The NMES was applied on the femoral quadriceps at a frequency of 50 Hz, with pulse duration of 300 milliseconds, and the on/off time was at a proportion of 1:2. Regarding the morphometry of the vastus lateralis fibers, a significant increase (P<0.05) in the transversal area of the treated group at 90 days was observed when compared with that identified at the time of immobilization. Thus, it can be concluded that low frequency NMES brings about hypertrophy of the vastus lateralis muscle in dogs after temporary rigid immobilization of the knee joint.

Hipertrofia compensadora após o autotransplante renal em cães associado à nefrectomia contralateral

O artigo não apresenta resumo.

Ureteroneocistostomia extravesical modificada pela sondagem ureterovesical peroperatória no autotransplante renal em cães

O artigo não apresenta resumo.

Avaliação da solução euro-collins como um meio de conservação do enxerto no transplante renal em cães

O artigo não apresenta resumo.

Using serial imaging data to model variabilities in organ position and shape during radiotherapy.

A model is proposed for incorporating the effects of organ motion into the calculation of dose in a statistical fashion based on serial imaging measurements of organ motion. These measurements can either come from a previously studied population of patients, or they can be specific to the particular patient undergoing therapy. The statistical distribution underlying the measurements of organ motion, including the changes in organ shape, is reconstructed non-parametrically without requiring any assumptions about its functional form. The model is thus capable of simulating organ motions that are not present in the original measurements, yet nonetheless come from the same underlying statistical distribution. The present model overcomes two particular limitations of many organ motion models: (a) the fact that they do not account for changes in organ shape, and (b) the fact that they make physically unrealistic assumptions about the functional form of the statistical distribution of organ motion, such as assuming that it is Gaussian. The present model can form the foundation of methods for the more accurate and clinically relevant calculation of the dose to the target volume and normal tissues.

Numerical analysis of a model of organ motion using serial imaging measurements from prostate radiotherapy.

We previously proposed a model for incorporating the effects of organ motion, including the changes in organ shape, into the calculation of dose in a statistical fashion based on serial imaging measurements of organ motion. In the present paper, numerical studies were used to investigate how the accuracy of the statistical calculation of dose depends on the number of organ motion measurements provided as input into the model. The dose calculated statistically with the model was consistently more accurate than the one obtained by directly resampling the serial measurements of organ motion. It was also more robust relative to the random variabilities present in the input organ motion measurements. The results confirm that the model can reproduce the statistical distribution of the organ motions measured in a serial imaging study, including the changes in organ shape, without making any assumptions about the functional form of this distribution. The model allows a more accurate calculation of dose to be performed from a given number of measurements of organ motion than would otherwise be obtained by directly resampling the measured data. It thus maximizes the information that is extracted from serial imaging measurements.

Comparative viewing modalities for CT cystography.

BACKGROUND: To define the speed and accuracy of two different reconstructive techniques using computed tomography (CT) cystography for the detection and measurement of urinary bladder masses and determine the overall ease of use. METHODS: Ten patients scheduled for cystoscopy for the evaluation of hematuria or bladder masses were studied by means of thin-section CT of the air-distended bladder. Two techniques were employed by two radiologists to blindly interpret the data: conventional two-dimensional data with interactive three-dimensional problem solving (2D3DPS) and surface-shaded display (SSD) three-dimensional images. The results were compared with the data from cystoscopy. RESULTS: Twenty-two (100%) of 22 masses detected on cystoscopy were visualized using the reconstructive techniques. Both modalities were shown to have high accuracy, but only the 2D3DPS had a sensitivity and specificity of 100% for both observers at the patient-level diagnosis. The sensitivities for detecting individual masses for the two observers were 100% and 64% for 2D3DPS and 64% and 70% for SSD. CONCLUSION: Both methods used to display the CT data had a high sensitivity and specificity for masses, but only the 2D3DPS had a sensitivity and specificity of 100% at the patient-level diagnosis, thus making it a feasible imaging modality for cystography. It was also preferred overall for ease of use, high accuracy, and relative low cost.

Quantitative analysis of DNA array autoradiographs.

DNA arrays and chips are powerful new tools for gene expression profiling. Current arrays contain hundreds or thousands of probes and large scale sequencing and screening projects will likely lead to the creation of global genomic arrays. DNA arrays and chips will be key in understanding how genes respond to specific changes of environment and will also greatly assist in drug discovery and molecular diagnostics. To facilitate widespread realization of the quantitative potential of this approach, we have designed procedures and software which facilitate analysis of autoradiography films with accuracy comparable to phosphorimaging devices. Algorithms designed for analysis of DNA array autoradiographs incorporate 3-D peak fitting of features on films and estimation of local backgrounds. This software has a flexible grid geometry and can be applied to different types of DNA arrays, including custom arrays.

Volume rendering quantification algorithm for reconstruction of CT volume-rendered structures: Part I. Cerebral arteriovenous malformations.

Volume rendering is a visualization technique that has important applications in diagnostic radiology and in radiotherapy but has not achieved widespread use due, in part, to the lack of volumetric analysis tools for comparison of volume rendering to conventional visualization techniques. The volume rendering quantification algorithm (VRQA), a technique for three-dimensional (3-D) reconstruction of a structure identified on six principal volume-rendered views, is introduced and described. VRQA involves three major steps: 1) preprocessing of the partial surfaces constructed from each of six volume-rendered images; 2) merging these processed partial surfaces to define the boundaries of a volume; and 3) computation of the volume of the structure from this boundary information. After testing on phantoms, VRQA was applied to CT data of patients with cerebral arteriovenous malformations (AVM's). Because volumetric visualization of the cerebral AVM is relatively insensitive to operator dependencies, such as the choice of opacity transfer function, and because precise volumetric definition of the AVM is necessary for radiosurgical treatment planning, it is representative of a class of structures that is ideal for testing and calibration of VRQA. AVM volumes obtained using VRQA are intermediate to those obtained using axial contouring and those obtained using CT-correlated biplanar angiography (two routinely used visualization techniques for treatment planning for AVM's). Applications and potential expansions of VRQA are discussed.

Volume visualization in radiation treatment planning.

Radiation treatment planning (RTP), historically an image-intensive discipline and one of the first areas in which 3D information from imaging was clinically applied, has become even more critically dependent on accurate 3D definition of target and non-target structures in recent years with the advent of conformal radiation therapy. In addition to the interactive display of wireframe or shaded surface models of anatomic objects, proposed radiation beams, beam modifying devices, and calculated dose distributions, recently significant use has been made of direct visualization of relevant anatomy from image data. Dedicated systems are commercially available for the purpose of geometrically optimizing beam placement, implementing in virtual reality the functionality of standard radiation therapy simulators. Such "CT simulation" systems rely heavily on 3D visualization and on reprojection of image data to produce simulated radiographs for comparison with either diagnostic-quality radiographs made on a simulator or megavoltage images made using the therapeutic beams themselves. Although calculation and analysis of dose distributions is an important component of radiation treatment design, geometric targeting with optimization based on 3D anatomic information is frequently performed as a separate step independent of dose calculations.

Initial clinical experience with a video-based patient positioning system.

PURPOSE: To report initial clinical experience with an interactive, video-based patient positioning system that is inexpensive, quick, accurate, and easy to use. METHODS AND MATERIALS: System hardware includes two black-and-white CCD cameras, zoom lenses, and a PC equipped with a frame grabber. Custom software is used to acquire and archive video images, as well as to display real-time subtraction images revealing patient misalignment in multiple views. Two studies are described. In the first study, video is used to document the daily setup histories of 5 head and neck patients. Time-lapse cine loops are generated for each patient and used to diagnose and correct common setup errors. In the second study, 6 twice-daily (BID) head and neck patients are positioned according to the following protocol: at AM setups conventional treatment room lasers are used; at PM setups lasers are used initially and then video is used for 1-2 minutes to fine-tune the patient position. Lateral video images and lateral verification films are registered off-line to compare the distribution of setup errors per patient, with and without video assistance. RESULTS: In the first study, video images were used to determine the accuracy of our conventional head and neck setup technique, i.e., alignment of lightcast marks and surface anatomy to treatment room lasers and the light field. For this initial cohort of patients, errors ranged from sigma = 5 to 7 mm and were patient-specific. Time-lapse cine loops of the images revealed sources of the error, and as a result, our localization techniques and immobilization device were modified to improve setup accuracy. After the improvements, conventional setup errors were reduced to sigma = 3 to 5 mm. In the second study, when a stereo pair of live subtraction images were introduced to perform daily "on-line" setup correction, errors were reduced to sigma = 1 to 3 mm. Results depended on patient health and cooperation and the length of time spent fine-tuning the position. CONCLUSION: An interactive, video-based patient positioning system was shown to reduce setup errors to within 1 to 3 mm in head and neck patients, without a significant increase in overall treatment time or labor-intensive procedures. Unlike retrospective portal image analysis, use of two live-video images provides the therapists with immediate feedback and allows for true 3-D positioning and correction of out-of-plane rotation before radiation is delivered. With significant improvement in head and neck alignment and the elimination of setup errors greater than 3 to 5 mm, margins associated with treatment volumes potentially can be reduced, thereby decreasing normal tissue irradiation.

Volumetric visualization of head and neck CT data for treatment planning.

PURPOSE: To demonstrate the utility of volume rendering, an alternative visualization technique to surface rendering, in the practice of CT based radiotherapy planning for the head and neck. METHODS AND MATERIALS: Rendo-avs, a volume visualization tool developed at the University of Chicago, was used to volume render head and neck CT scans from two cases. Rendo-avs is a volume rendering tool operating within the graphical user interface environment of AVS (Application Visualization System). Users adjust the opacity of various tissues by defining the opacity transfer function (OTF), a function which preclassifies voxels by opacity prior to rendering. By defining the opacity map (OTF), the user selectively enhances and suppresses structures of various intensity. Additional graphics tools are available within the AVS network, allowing for the manipulation of perspective, field of view, data orientation. Users may draw directly on volume rendered images, create a partial surface, and thereby correlate objects in the 3D scene to points on original axial slices. Information in volume rendered images is mapped into the original CT slices via a Z buffer, which contains the depth information (Z coordinate) for each pixel in the rendered view. Locally developed software was used to project conventionally designed GTV contours onto volume rendered images. RESULTS: The lymph nodes, salivary glands, vessels, and airway are visualized in detail without prior manual segmentation. Volume rendering can be used to explore the finer anatomic structures that appear on consecutive axial slices as "points." Rendo-avs allowed for acceptable interactivity, with a processing time of approximately 5 seconds per 256 x 256 pixel output image. CONCLUSIONS: Volume rendering is a useful alternative to surface rendering, offering high-quality visualization, 3D anatomic delineation, and time savings to the user, due to the elimination of manual segmentation as a preprocessing step. Volume rendered images can be merged with conventional treatment planning images to add anatomic information to the treatment planning process.

Using vascular structure for CT-SPECT registration in the pelvis.

UNLABELLED: The authors outline a method for three-dimensional registration of pelvic CT and 111In-labeled monoclonal antibody capromab pendetide (111In MoAb 7E11.C5) images using 99mTc-labeled red blood cell SPECT data. METHODS: This method of CT-SPECT registration relies on the identification of major blood vessels in the CT and 99mTc SPECT images. The vessels are segmented from the image datasets by outlining them on transverse planar slices using a mouse-based drawing tool. Stacking the transverse outlines provides a three-dimensional representation of the vascular structures. Registration is performed by matching the surfaces of the segmented volumes. Dual isotope acquisition of 111In and 99mTc activities provides precise SPECT-SPECT registration so that registration in three dimensions of the 111In MoAb and CT images is achieved by applying the same transformation obtained from the 99mTc SPECT-CT registration. RESULTS: This method provided accurate registration of pelvic structures and significantly improved interpretation of 111In MoAb 7E11.C5 exams. Furthermore, sites of involvement by prostate cancer suggested by the 111In MoAb examination could be interpreted with the bony and soft tissue (nodal) anatomy seen on CT. CONCLUSION: This method is a general clinical tool for the registration of pelvic CT and SPECT imaging data. There are immediate applications in conformal radiation therapy treatment planning for certain prostate cancer patients.

In the radiotherapy of prostate cancer, technique determines the doses to the penile structures.

For 11 consecutive prostate cancer patients undergoing three-dimensional conformal radiotherapy (3DCRT) in our institution, penile structures (PNS) were outlined in CT images obtained for treatment planning purposes. Dose-volume histograms (DVHs) were compared in order to study dose-volume relations for three techniques: 4FLD, an axial coplanar, four-field box technique; 6FLD, a six-field coplanar technique; and 4NAX, a coplanar but non-axial, four-field technique. All three techniques delivered equal doses to the planning target volumes (PTV). Our statistical analyses strongly indicate that the three techniques can be ranked as 6FLD better than 4FLD (and 4FLD better than 4NAX) as far as irradiating PNS volume during treatment of prostate cancer (PC) is concerned. For each technique, there is a "spread" owing to differences in patient anatomy and/or target size, position, and extent, but each technique has a similar "profile" or "shape" distinct from other techniques. Whether irradiating smaller volumes of PNS will influence the sexual potency outcome remains to be demonstrated. However, PNS should be considered as another critical structure in addition to rectum, bladder and femoral heads in the radiotherapy (RT) of PC, especially in 3DCRT dose escalation studies. Sexual potency outcomes can be correlated to dose-volume relations in the future and this will help refine radiotherapy techniques further.

Fast iterative algorithms for three-dimensional inverse treatment planning.

Three types of iterative algorithms, algebraic inverse treatment planning (AITP), simultaneous iterative inverse treatment planning (SIITP), and iterative least-square inverse treatment planning (ILSITP), differentiated according to their updating sequences, were generalized to three dimension with true beam geometry and dose model. A rapid ray-tracing approach was developed to optimize the primary beam components. Instead of recalculating the dose matrix at each iteration, the dose distribution was generated by scaling up or down the dose matrix elements of the previous iteration. This significantly increased the calculation speed. The iterative algorithms started with an initial intensity profile for each beam, specified by a two-dimensional pixel beam map of M elements. The calculation volume was divided into N voxels, and the calculation was done by repeatedly comparing the calculated and desired doses and adjusting the values of the beam map elements to minimize an objective function. In AITP, the iteration is performed voxel by voxel. For each voxel, the dose discrepancy was evaluated and the contributing pencil beams were updated. In ILSITP and SIITP, the iteration proceeded pencil beam by pencil beam instead of voxel by voxel. In all cases, the iteration procedure was repeated until the best possible dose distribution was achieved. The algorithms were applied to two examples and the results showed that the iterative techniques were able to produce superior isodose distributions.

A three-dimensional algorithm for optimizing beam weights and wedge filters.

An essential step towards optimizing and automating radiation therapy treatment planning is to develop an effective algorithm to find the optimal beam weights and wedge filters for a given set of beam directions and modalities. This problem is solved by introducing a variable transformation based on the universal and omni wedge principles. Instead of directly optimizing an objective function with respect to wedge angles and orientations, each field is first decomposed into a superposition of an open field and two orthogonal wedged fields. This transforms the problem of finding J beam weights, wedge angles, and orientations to that of optimizing a system with 3J beam weights (J open beams and 2J nominal wedged beams), where J is the total number of incident beam directions. An iterative algorithm based on a method originally developed for image reconstruction is used to find the 3J beam weights. The technique is applied to a few clinical cases. Treatment plans are improved compared to those obtained through the conventional manual trial and error planning process. In addition, planning time and effort are greatly reduced.

Image processing in stereotactic planning: volume visualization and image registration.

Radiation treatment planning (RTP), historically an image-intensive discipline and one of the first areas in which three-dimensional (3D) information from imaging was clinically applied, has become ever more critically dependent on accurate 3D identification of target and non-target organs with the advent of conformal radiation therapy, stereotactic radiotherapy, and radiosurgery. In addition to the interactive display of wire-frame or shaded surface models of anatomical objects, proposed radiation beams, and calculated dose distributions, use may also be made of direct visualization of relevant anatomy from image data. Although anatomical analysis of dose distributions is an essential component of radiation treatment design which requires geometric definition (i.e., segmentation) of all volumes of interest, geometric targeting with optimization based on 3D anatomical information is frequently performed as a separate step independent of dose calculations. For this early step in the planning process, and certainly for diagnostic purposes, visualization without explicit segmentation may be a useful additional capability. Additionally, we suggest that direct visualization of high contrast targets such as arteriovenous malformations (AVM) from computerized tomography (CT) or magnetic resonance (MR) angiography may serve as a tool for target volume delineation. Frequently, information from multiple modalities or multiple scans of the same modality is important in planning a given case. In such instances, image registration may prove useful to allow synthesis of information from multiple sources into a single consistent coordinate frame. Numerous image registration methods are available, each with characteristic strengths and weaknesses.